27 66-UM-4KNVR-CSE-6
⚫
Secondary Stream: Select the FPS and GOP for the secondary stream (available only if
Dual
Stream
is activated in
Stream Type
).
⚫
Sec. Stream Bitrate: Select the bitrate for the secondary stream.
⚫
Decode Ref. : Select the number of reference frame for the decoder, and choose
Immediate
for
lower latency or
Smooth
for smoother but higher latency video.
⚫
Camera Disable: Disable the video function (live feeds and playback) of the selected camera.
⚫
Sync Time with NVR: Turn
On
for the camera to sync time with the NVR.
⚫
Assign RTSP URL: Assign required RTSP URL, NVR will connect to camera via required RTSP
URL but not Onvif.
⚫
RTSP Multicast Setting: Assign required RTSP multicast port.
⚫
WS Discovery: Click
WS Discovery
to scan for connected devices on the network. Click
Cancel
to stop scanning.
⚫
Auto Adjust: Automatically assign IP for connected cameras.
⚫
Snap: Show snapshot thumbnails for all the cameras.
⚫
Set IP: Assign an IP address to the camera.
Chapter 4-2 Video
In this page, you can adjust several camera parameters including
Contrast
,
Brightness
,
Saturation
,
and
Sharpness
.
Click
Default
to restore the NVR to its factory settings. Click
Refresh
to update the preview image.
Chapter 5 Record Setup
Click
to enter
NVR SETTINGS,
press
RECORD
in the left pane to enter the
RECORD SETUP
page. To adjust recording or schedule settings, the setting options are described
below.
