FIG. 1
FIG. 2
INSTALLATION
1. Take out the bracket from the box first. Put the power cable and network cable through
the bracket and then fix it to the wall (FIG.1 & FIG.2).
2. Secondly, take out the camera body and open the top cover with screw driver (FIG.3).
FIG. 3
3. Put the power cable and network cable through the bracket rubble first and then go
through the bottom of camera body (FIG.4). Plug and fix the power cable to the
terminal and plug the network cable to RJ-45 connector of the IP camera (FIG.5).
