HD Infrared
IP Camera
PoE Splitter
(DC12V)
PC
LAN
LAN / Internet
PoE Switch
LAN
(2). Use with PoE-powered network switch and the PoE splitter connected to a network.
For the convenience of users, restore the factory default settings will revert to the
default IP address 192.168.0.200.
NOTE
EMERGENCY FACTORY DEFAULT
Use hardware to restore factory default settings, follow these steps:
1. Hold "RESET" key 10 seconds, then release.
2. After about 40 seconds, the network LED light is off, and then lit.
3. This camera has completed the factory default settings, and then reboot.
4. Use IPScan software search for this IP device.
5. Using a Internet browser open the IP device.
6. Enter the default username "admin" and password "pass" to operate.
Summary of Contents for IPR712M
Page 1: ...Instruction Manual IPR712S IPR712M IPR722S 4 3 6 D N Megapixel HD Infrared IP Camera...
Page 6: ...PART DESCRIPTION DIMENSION 154 101 72 5 67 82 IPR712S Unit mm...
Page 7: ...154 101 72 5 67 82 IPR712M IPR722S Unit mm...
Page 21: ...66 IPR712CSE MERIT LILIN ENT CO LTD http www meritlilin com...
