(3). Use PoE power injector and the network switch connected to the network.
For the convenience of users, restore the factory default settings will revert to the
default IP address 192.168.0.200.
NOTE
EMERGENCY FACTORY DEFAULT
Use hardware to restore factory default settings, follow these steps:
1. Hold "RESET" key 10 seconds, then release.
2. After about 40 seconds, the network LED light is off, and then lit.
3. This camera has completed the factory default settings, and then reboot.
4. Use IPScan software search for this IP device.
5. Using a Internet browser open the IP device.
6. Enter the default username "admin" and password "pass" to operate.
IPG1022ELSX
PoE Switch
PC
LAN
LAN / Internet
(2). Use with PoE of the network switch connected to the network.
IPG1022ELSX
PoE Power Injector
PC
LAN
LAN / Internet
AC
Non-PoE Switch
LAN
