(2). Use DC12V power adapter and network switch connected to a network.
PC
LAN
LAN / Internet
Non-PoE Switch
Use hardware to restore factory default settings, follow these steps:
1. The "RESET" cable short 10 seconds, then release.
2. After about 40 seconds, the network LED light is off, and then lit.
3. The network server will reboot.
4. Use IPScan software search for this IP device.
5. Using a Internet browser open the IP device.
6. Enter the default username "admin" and password "pass" to operate.
For the convenience of users, restore the factory default settings will revert to the
default IP address 192.168.0.200.
NOTE
IPR312SX
DC12V Adaptor
EMERGENCY FACTORY DEFAULT
