Lilin DHD204A, User Manual, Page: 21 / 45

20
3-2 Event Setup
3-2.1 Video Loss
3-2.1.1 Configuration
Item Description
Enable Enable/Disable video loss detection.
3-2.1.2 Event Handler
Item Description
Logs Write to event log when the video loss event happens.
Event Record
Select channel for event recording when event occurs. The
video setup corresponds to the "Configuration →
Recording Settings → Event Video Recording" (refer to
3-1-1-2 Event Record).
Popup
In the live mode, if video loss of a channel is detected, it
will pop up the channel full screen. You can specify a
warning window display, 1: the main screen.
Popup Channel When an event occurs, pop up the specified channel.
Buzzer
Specify the DVR behavior of whether to activate the
buzzer when an event occurs.
Relay
When an event occurs, enable or disable Relay function.
(Depending on DVR’s model)
PTZ When event occur, enable or disable PTZ function.
Go Preset
Moves the camera to the specified preset point when an
event occurs.
Resume Preset
Moves the camera back to the specified preset point when
an event is finished.