EXT: Switches between color picture and monochrome picture when an
external day/night switching signal is received. This function allows
the usage of external(TTL) device to control camera switching from
DAY to NIGHT mode or NIGHT to DAY mode. The DAY mode will be
triggered by HIGH(+3V~+5V) potential and NIGHT mode will be
triggered by LOW(0V) potential.
MOTION DET (Motion Detection)
The motion detection detects the moving object in the scene by monitoring
change in brightness level. You can select the level of sensitivity for motion
detection to 4 zones.
1. Select [MOTION DET] option on the [CAMERA SETTING] menu.
2. Use
or
button to select a [ON] and press "SET" button. The MOTION
DETECTION menu appears.
CAMERA SETTING
CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
MOTION DET
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT
OFF
ALC
ATW
AUTO
OFF
MIDDLE
OFF
MOTION DETECTION
ZONE NUMBER
ZONE STATE
HEIGHT
WIDTH
MOVE Y
MOVE X
SENSITIVITY
TRIGGER
TRIG TYPE
EXIT
AREA1
OFF
OFF
NO
RET
40
40
50
50
50
3. Use
or
button to select a Zone number(AREA1~AREA4) on the [ZONE
NUMBER].
4. Use
or
button to setup the ON or OFF on the ZONE STATE.
5. Use
or
button to select an option then use
or
button to adjust the
option.
HEIGHT: Enlarge or decrease the vertical size of the mask.
WIDTH: Enlarge or decrease the horizontal size of the mask.
MOVE Y: Moves vertical position of the mask.
MOVE X: Moves horizontal position of the mask.
6. Use [SENSITIVITY] option to obtain the optimum detection level(0~100).
7. Use
or
button to select a ON or OFF on the TRIGGER.
8. Use
or
button to setup the NO or NC on the TRIG TYPE.
20
