background image

The CMG1086/1088 series Day&Night Adaptive Tone Reproduction 700TV 
Lines Resolution Camera introduces supremacy in video quality. This compact 
yet full functional color DSP camera use high sensitive 1/3" Exview HAD interline
transfer CCD. The camera achieves superb quality color images at 700TV lines
resolution. With ultralow light levels of 0.025 Lux(F1.2) and enhanced noise 
reduction technology, it enables noise-free, clear image monitoring day and night.

By adopting a diagonal 6mm(1/3") 480K(NTSC) pixel, 570K(PAL) pixel CCD,
the camera produces clear picture quality with a horizontal resolution of 700TV
lines for color.

Improves the visibility of the entire picture by providing the optimum gradation
compensation for the image.

Reduces the image noise in order to improve the image quality of the camera.
In particular, it reduces the noise which is generated under low-brightness
shooting conditions and other high-gain states.

Improves the visual recognition of license plates and other such objec ts by
suppressing or masking strong light sources (such as the headlights of
automobiles) in dark places.

 
 
 

 
 

 
 
 

 
 
 

 
 
 

Suppresses the color rolling which arises when there are slight deviations
between the blinking frequency of non-inverter fluorescent lights and the drive
frequency of the image sensor devices.

FEATURES

RESOLUTION OF 700TV LINES

ADAPTIVE TONE REPRODUCTION(ATR)

NOISE REDUCTION(2D-NR)

HIGH LIGHT COMPENSATION(HLC)

COLOR ROLLING SUPPRESSION(ANTI CR)

1

Summary of Contents for CMG1086 series






































Reviews: