FIG.5
FIG.4
4. Then, adjust the focus and zoom of the lens to optimize video image before
tightening the screws(FIG.5).
Note: Vari Focal model only.
6-1. USER OSD SETTING
A.
(UP)
B.
(LEFT)
C.
(RIGHT)
D.
(DOWN)
E. SET : Executes selections and displays a submenu for an
item with the
mark.
: Press to move the cursor upwards or to select
items.
: Press to move the cursor to the left and to select
or adjust the parameters of the selected item.
The parameters changes each time this button is
pressed.
: Press to move the cursor to the right and
select or adjust the parameters of the selected
item. The parameters changes each time this
button is pressed.
: Press to move the cursor downwards or to select
items.
5. Replace the top cover and tighten the screws with a screw driver(FIG.6&FIG.7).
FIG. 6
6. Connect to an Up-the-Coax (UTC) digital recorder that supports AHD-Coaxial
protocol. Then use the 8-directional buttons (FIG. 8) to adjust settings for the
best images.
FIG.8
SET
UP
DOWN
RIGHT
LEFT
FOCUS
ZOOM
3. For models with vari-focal lens, a screw driver is required to open the top
cover of the camera (FIG. 4).
FIG. 7
