Lil' Ride 80-109, Instruction Manual, Page: 5 / 8

Assembly
1. Assembly of the rear shaft including both rear wheels:
A. Insert the rear shaft into the bodywork, ensuring the notched side is on the
left. On the left, connect one wheel to the rear shaft, making sure that the
outside of the wheel has the three holes on the edges for the wheel cover.
Use an iron washer to fill in the gap. Then use an iron pin to fasten it. Affix
wheel cover to the wheel by aligning the three tabs in the wheel cover into
the three tabs on the wheel.
B. On the right, connect the electric plug. Then connect the motor, the plastic
sleeve pipe, and wheel to the rear shaft. Make sure the inside of the wheel
fits into the plastic sleeve pipe. Then use the iron pin to secure it and put the
wheel cover on. Use an iron washer to fill in the gap.
2. Use the thin axle to connect the
top cover and the bottom cover to
create the tool box. Then, secure
the tool box support to the body
with screws.