background image

Lift bracket

How to attach Mobile:
1.  Insert end of Mobile Arm into Music Box Base.
2.  Place Music Box Base onto back rail of Sleeping Nest and push until it clicks into place.
3.  Attach Toys to the end of the Mobile Arm that is not inserted into Music Box Base.

How to position Canopy:
1. Unfold 

Canopy.

2.  Position over top of Sleeping Nest until secured.

Using Your Bedside Sleeper

Adjusting the height:
IMPORTANT: Never adjust height while your baby is in the bedside sleeper. Always make sure the indicator 

numbers on left and right sides are the same. The Sleeping Nest must be kept level. Failure to do so could result 

in serious injury or death.
1.  To raise, step on the center of the Foot Stabilizer Bar to 

 

stabilize the bedside sleeper, while holding both sides 

 

of the Sleeping Nest Rail and pulling the Sleeping Nest 

 

up to the desired height.

2.  To lower, locate the plastic handles on the Left and 

 

Right Tube Feet. Pull both handles up simultaneously 

 

to release the locks, then push Sleeping Nest down 

 

to the desired height.

3.  Check to make sure the indicator numbers on the left 

 

and right sides are the same.

How to raise and lower the front of the Sleeping Nest:
1.  Unzip the left and right sides of the front of the Sleeping Nest as shown.
2.  There are plastic release buttons on either side, which will be covered by the Sleeping Nest’s fabric cover.
3.  Push these buttons to release the front rail of the Sleeping Nest.
4.  Push the front of the Sleeping Nest down as shown.

5

Summary of Contents for LJBSCT









Reviews: