Service Manual Viking™XL
mobile lift
• 3EN350401 Rev. 10
45
www.hill-rom.com
l
www.liko.com
Wireless Handcontrol HBL 20
Handkontroll IR HBL20
Assembly Instruction
Monteringsanvisning
Prod. No. 20490031
3SE640298-04
2011-03-03
© Copyright Liko AB
www.liko.com
Tools required:
132 mm / 5 inch
2.
A.
To activate IR control: Hold the hand
control IR about 20 cm/0.8 inch. from the
control unit’s IR receiver and press the
large UP and DOWN buttons on the hand
control simultaneously for about 2 seconds.
A signal is heard when the function is
activated. The lift is now ready to use with
Handcontrol IR.
B.
Check to determine if other lifts in the
room are affected by your hand control. If
other lifts are affected by your hand control:
Use the large UP and DOWN buttons on
the operation panel of the lift that is to be
used. Press both buttons simultaneously
until a signal sounds. The lift has now been
assigned a unique communication code.
Now, activate IR control according to proce-
dure A, above.
4.
5.
Choice
1.
/
Contains: Qty:
Handcontrol HBL20
1
Clips with hook HBL20
1
Charge Cable Hook
2
Fits:
Golvo 8000 / 8008
Viking M Prod. No. 2040015
Viking L Prod. No. 2040014
Viking XL Prod. No. 2040013
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
-
Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.
50 mm / 2 inch
3. Golvo
Viking M, Viking L, Viking XL
5.333
5.333
