34
7.0
ServiceManual Uno™200 mobile lift (3EN500402 Rev. 5)
34
www.liko.com
Instructions regarding the check points for
Uno 200
4. Diagonal Bar
Retaining ring SGA10 mounted with sharp edge out.
Prod. No. 21090043
1. Check the diagonal bar and the retaining
ring for wear. Replace if worn.
2. If needed, clean the parts.
5. Actuator linkage
1
2
Pos. No Prod. No
Name
1
20190067
Cover hat M10 grey U102
* 2
21090002
Lockingnut M10 Nyloc
* Article 20190067 consist of cover hat + washer.
The washer mounts with the flat side down.
Base-motor cable
1. Remove link arm cover, bolt and nut.
2. Clean, lubricate and re-assemble pivot bolt, bearing sleeves and hardware.
3. Inspect the legs at the fixpoint. Replace if parts are worn.
4. Reconnect actuator to link arm. Apply cover hats.
