6
www.liko.com
Uno 100/102 • 7EN150104-01
6. Place the removable battery pack into position on
top of the control box. Check that the battery pack
is locked to the assembling part (a ’click’ will be
heard).
9. Reset the emergency stop by turning the button in
the direction indicated by the arrows.
5. A) Connect the extension cable for the charging
cable to the control box.
B) Insert the extension cable in the tension clip
underneath the control box.
C) Connect the charging cable to the extension
cable.
A
B
C
• lift mast motions correspond with the buttons on the
handcontrol
• emergency lowering functions properly (mechanical
and electrical)
• the width adjustment of the base functions
After assembling, check to ensure that:
• wheel brakes work properly
• the indicator lamp on the front of the control box
lights during charging.
7. Mount the holder for the charging cable. Hook it on
the outer edge and press down until you hear a
’click’.
8. Stick the decal "Using the lift" (included in bag
containing instructions) on one side of the mast.
ON
CHARGE
EMERGENCY
BATTERY
Using the lift
Operation
Operate the lift using the
pushbuttons on the hand
control.
NOTE!
On some
models, base width is
adjusted manually with
lever/pedal.
Emergency Lowering
Turn the red emergency-
lowering cylinder in
the direction shown by
the arrows.
Emergency Stop
Push the red Emergency
Stop button on the control
box. To reset: Turn the
button in the direction of
the arrows.
Charging the batteries
Charge every night after
use. Before charging,
ensure that the red
Emergency Stop button
is not pushed in. Do not
charge in a wet area!
Locking the wheels
The rear wheels can be
locked by stepping on the
pedal above the wheel.
Locking the wheels
can affect stability
negatively; therefore,
wheels should only be
locked during lifts from
the floor.
7US90103 • © 2002 Liko
AB
Read instruction guide!
!
www.liko.com
