3
www.hillrom.com
7EN160125 Rev. 3 • 2020
Assembly
FlexLink
Adapter
Sling bar bolt
Fixed assembly to lift
Applies to the following sling bars:
Sling Cross-bars 450 and 670 (Prod. No. 3156021 and 3156018)
Applies to:
Likorall™ 242 S/ES overhead lift, Likorall™ 243 ES overhead lift, Golvo™ mobile lift, Uno™ 100/102 mobile lift*
and
Viking™ mobile lift*
For fixed assembly, use the provided M10 x 25 (special) bolt and M10 lock nut to attach the Sling Cross-bar. Check that the
bolt protrudes 2 mm through the nut, and also that the sling bar bolt can move (adaptation works as it should).
*
For fixed assembly to mobile lifts with FlexLink, an adapter for the lift in question must always be fitted, see below.
Adapter 8 mm,
(Prod. No. 2016502)
Applies to: Uno up to and incl. serial no. 31824. See applicable assembly instructions.
Adapter 12 mm,
(Prod. No. 2016504)
Applies to: Uno up to and incl. serial no. 31825.
and the Viking™ mobile lift series. See applicable assembly instructions.
Fixed kit 4, (
Prod. No. 3308860)
Fits: Prod. No. 3156018 and 3156021
in combination with
LikoGuard™ L, XL overhead lift.
NOTE! Shall be assembled by personnel authorized by Hill-Rom!
8 mm
12 mm
Assembly with Quick-release
Applies to the following sling bars:
Sling Cross-bar 450 and 670
(Prod. No. 3156022 and 3156019)
Applies to:
Golvo™ mobile lift*, Likorall™ 242 S/ES R2R overhead lift,
Likorall™ 243 overhead lift*, Likorall™ 250 overhead lift* and Multirall™
overhead lift. *If fitted with Q-link (Prod. No. 31590005). See applicable
assembly instructions.
Q-Link
After installation, check that the latch locks
and
moves freely in the
sling bar hook.
Installation of latches
How to Attach a Sling to Sling Cross-Bars
NOTE! The wider part of the Cross-bar is intended for use with the sling’s upper strap loops and the narrower part of the Cross-bar is to be
used for the leg support´s strap loops.