Overview Sabina SeatStrap
© Copyright Liko
AB 2009-10
Medical Device Class I
Name
Prod. No.
Material
Max. Load
Sabina SeatStrap
3591115
Polyester, plastic-coated fabric
200 kg (440 lbs)
Plastic Reinforcement
A plastic reinforcement (polyethylene) is provided with the SeatStrap and is intended to facilitate
the application.
www.liko.com
Care and Maintenance
Inspect the lifting accessory periodically, especially after laundering. Pay special attention to wear and damage to material/
fabric, seams, straps and strap loops. Do not use damaged lifting accessories. If anything is unclear, please contact
the manufacturer or supplier.
Washing instructions:
See the SeatStrap’s product label. The plastic reinforcement should be cleaned with disinfectants.
Liko’s products undergo continuous development, which is why we reserve the right to make product changes without prior
notice. Contact your Liko representative for advice and information about product upgrades.
Sabina SeatStrap complies with the requirements in the medical device directive for Class I products (MDD 93/42/EEC).
It also meets all requirements in accordance with the harmonized EN ISO 10535 standard.
Design and Quality by Liko in Sweden
Liko is quality certified in accordance with ISO 9001 and its equivalent for the medical device industry, ISO 13485.
Liko is also certified in accordance with environmental standard ISO 14001.
Start the raising. The SeatStrap
helps during the first part of the
raising.
In raised position the SeatStrap loses
its load and can easily be pushed
to the side to facilitate toilet visits,
for instance.
During lowering, the patient is more
easily placed into the right position
in the wheelchair if the SeatStrap
is not used.
Back to a Sitting Position
Raising
Manufacturer:
Liko AB
SE-975 92 Luleå
Sweden
