Sabina 200
30
www.liko.com
Charger Socket Connection
Anslutningskabel för laddning
Assembly Instruction
Monteringsanvisning
Prod. No. 20190079
3SE690237-01
2013-01-21
Tools required:
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
-
Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.
5.530
Contains:
Qty:
Cable
CBJH
1
Fits:
Uno 200
(Control Unit 20190060)
Sabina 200 (Control Unit 20190060)
4.
5.
Activate the emergency
stop.
1.
2.
3.
5 mm
T20
6.
Lift the PCB and unplug the connector from
the charger cable. Pull out the charger cable
from the housing and insert the new one in
the same way.
Before assembly:
ESD protection is required.
7.
The following should be observed when reassembling
- Please observe the guides are in the respective holes in the PCB, when placing the PCB in the housing.
- Wires should not be pinched
- Connectors should not be bended or physically stressed.
Reassemble the Control Unit.
1
2
3
4
5
6
7
- Lift motor cable to socket 1
- Base-motor cable to socket 2
- Hand control to socket 3.
3
2
1
