7EN161113 Rev. 5 • 2020
5
www.hillrom.com
Safety information
A Liko™ lift system is a combination of products. Each product has its own maximum load marking. The lowest specified
maximum load of the products that comprises the system sets the maximum load for the complete lift system.
The lift system can contain following products; lift rails, a lift motor, a sling bar, a sling or other recommended accessories.
Identify the maximum load for the complete lift system by reading the maximum load marking on each product in the system.
Contact your Hill-Rom representative for support and advice.
Intended use
A SlingGuard™ sling bar is used as an aid in carrying out lifts but does not come into contact with the patient, therefore we do
not go into different patient conditions in the instriction for use. Surrounding (functional) environment: Temp. +5 °C to +40 °C,
relative humidity 15% to 93% non-condensed. Barometric pressure range of 70 kPa to 106 kPa.
In the event of any queries regarding this product, contact your Hill-Rom representative.
For guidance and support in choosing the correct sling, visit www.hillrom.com or contact your Hill-Rom representative.
Note! Always read the instruction for use that comes with Liko´s different sling models for correct and safe use of the sling.
The total maximum load for a lift system is always determined by the product in the system with the lowest
specified maximum load.
Read and understand the Instruction for use in its entirety before using the product.
Use of the product without a full understanding of the contents is subject to risk.
Read the instruction for use for both the patient lift and lifting accessories before use. Lifting and
transferring a person always involves a certain level of risk. It is important to completely understand the
contents of the instruction for use. The equipment should only be used by trained personnel. Contact your
Hill-Rom representative in the event of any uncertainties or questions.
Under no circumstances may the sling bar be modified. In the event of questions, please contact Hill-Rom.