5
w w w . l i k o . com
Likorall 242, 243, 250 • 7EN120115-03
Lifting accessory with quick-release hook
(Likorall: 242 R2R, 243 ES, 250 ES)
Push down the red catch and connect the quick-release hook to the Q-link. Release and check that the catch locks
in order to prevent involuntary unhooking from the Q-link. Read more about Liko´s Quick-release Hook system on
page 9.
Mechanical emergency lowering
(Likorall 242 S/ ES)
1) Move the emergency lowering handle up and down
until the patient has been lowered and the lift strap is
completely slack. Always ensure that the emergency
lowering is made to a bed, wheelchair or other suita-
ble location.
2) After mechanical emergency lowering has been
performed, resetting/adjustment of the lifting height is
required:
- Lower the sling bar so that the lift strap is completely
slack.
- Hold down the emergency lowering handle halfway.
Simultaneously, tighten the lift strap by turning the
black wheel counter clockwise with the other hand.
Repeat until the desired height has been achieved.
1.
2.
Quick
Release
Hook
Emergency stop
For emergency stop
: pull the red emergency stop cord.
To reset
: turn the button in the direction of the arrows.
The red cord on the lift motor´s end cover is intended for use if an emergency situation occurs.
Reset:
Activate:
Q-link
Installation of Latches
After installation, check that the latch locks
and runs freely in the sling bar hook.
