Lika SMAX-AI1-PRG-L2, User Manual

Page: 81 / 84

SMAX MODBUS®
9 Default parameters list
9.1 List of the Holding Registers with default value
Registers list and address Default value
Resolution [0000 hex]
hundredths of a mm
10
Preset value [0001 hex] 0
Offset value [0002 hex] 0
Scaling function in
Operating parameters
[0003 hex] 0
Code sequence in Operating
parameters [0003 hex]
0
Node address [0004 hex] 1
Serial com baud rate [0005
hex]
4
Watchdog enable in Control
Word [000A hex]
0
Save parameters in Control
Word [000A hex]
-
Load default parameters in
Control Word [000A hex]
-
Perform counting preset in
Control Word [000A hex]
-
9.2 List of the Input Registers
Registers list and address Description of the bits
Alarms register [0000 hex] 0 Machine data not valid
1 Flash memory error
2 Hall sensors error
3 Mounting error
11 Watchdog
Current position [0001 hex] -
Current velocity [0002 hex] -
Wrong parameters list [0003 hex] 1 Resolution [0000 hex]
2 Preset value [0001 hex]
3 Offset value [0002 hex]
4 Operating parameters [0003 hex]
5 Node address [0004 hex]
6 Serial com baud rate [0005 hex]
SW Version [0004 hex] -
HW Version [0005 hex] -
Status word [0006 hex] 0 Scaling
1 Counting direction
8 Alarm
MAN SMAX MB E 1.2 Default parameters list 81 of 84