KIT MTAL
MAN KIT MTAL I_E 1.0
Pag.6
www.lika.it
www.lika.biz
D
. Tight the screws till the complete locking of the
clamp to the base.
E
. It ’s possible to position the magnetic tape in
three different couples of holes.
F
. Place the clamp with the connected magnetic
tape on the support plate with the referring pivots
in correspondence with the desired couple of holes.
G
. Fix the clamp to the plate using the supplied
plastic nut; the pivots will assist the correct
alignment.
H
. Lock with the supplied screw from the opposite
side of the nut.
Now it ’s necessary to unroll the magnetic tape in
the lift vain and cut it at a proper length to be fixed
at the bottom plate.
Insert the magnetic tape into the hole on the sensor
Repeat steps from A to D for the clamp fixing of the
lower part of the magnetic tape.
I
. Hook the supplied spring into the suitable hole of
the clamp.
