IF50
13 - Monitor function
The MONITOR function of the OS3.2 PC software allows the operator to display
some important data on the PC screen with continuous refresh cycles.
To enter the MONITOR function select TOOLS in the menu bar of the OS3.2 PC
operator software, then press MONITOR command to open the basic view of the
MONITOR window. Click the DEFINE… command to open the MONITOR
DEFINITIONS window. You will find a list of all accessible parameters and actual
values; however some items are not available to user.
Using IF50 converter, the following registers may be useful:
C1 C2 Description
:
8
Actual conversion result in percentage of the „full scale“, format
xxx.xxx % *)
;
0
Actual count, input A
;
4
Actual count, input B
;
3
Actual analogue output, scaling 0 – 10 000 millivolts
*) Also considering the scaling operands, see section “11.1 Register < :8 > settings” on page 58.
MAN IF50 I_E 1.0.odt
13 - Monitor function
71 / 80
