Lika AMM5A / BG1 Series, User Manual

Page: 39 / 56

AMM5A & AMM5B • SSI, BiSS, & RS-485
03630 = serial number in ascending order (remaining digits)
Command
[77, wo]
Value Function
01 Save parameters
02
Activate Preset
After having set a new value in any register use the
Save parameters
function
in the Command register to save the new value. Set “01” in the Command
register.
After having set a new value in the
Preset
register use the
Activate Preset
function in the
Command
register to activate the preset function. Set “02” in
the
Command
register.
After having sent the command the register is set back to "00" automatically.
Wait 30 ms at least (EEPROM writing time) before activating a new function.
Device ID
[78 … 7D, ro]
These registers contain the Device ID (name and hardware-software release).
Identification name is expressed in hexadecimal ASCII code.
Registers 78 … 7B show the name of the device.
Registers 7C and 7D show the hardware-software release.
Device ID registers structure:
Register 78 79 7A 7B 7C 7D
2
47
… 2
40
2
39
… 2
32
2
31
… 2
24
2
23
… 2
16
2
15
… 2
8
2
7
… 2
0
Hex 41 4D 4D 35 xx xx
ASCII A M M 5 xx xx
Manufacturer ID
[7E – 7F, ro]
These registers contain the Manufacturer ID. Identification name is expressed
hexadecimal ASCII code.
Register 7E 7F
Hex 4C 69
ASCII
L i
Li = Lika Electronic
MAN AMM5A_B SSI_BiSS_RS485 E 1.9.odt 6 - BiSS C-mode interface 39 of 56