If you need some help, call us on
0800 218 2182*
or go to
bt.com/producthelp
74
Using additional handsets
You can register up to five GAP
compliant handsets to your
BT7600 base to extend your
phone system without needing
to install telephone extension
sockets for each new phone.
If a handset becomes
un-registered it will need to be
registered to the base again.
Please register this handset will
be displayed, select
OK
then
follow the instructions starting
from point 4 below.
You have 2 minutes to complete
the registration process. After 2
minutes the In use light on the
base will stop flashing.
If registration isn’t successful
the first time, please try again
incase the base registration
period ran out of time.
If there are already five
handsets registered to the
base, the registration will fail.
You must de-register another
handset before you can register
the new one.
If you’ve bought a BT7600 multiple pack, any
additional handsets come pre-registered to the
base. However, if you purchase an additional
handset separately, you must register it to your
BT7600 base before it can be used.
Register an additional handset
1. Select
Menu
, scroll
to display
Settings
and
press
OK
.
2. Press
to highlight
Registration
and press
OK
.
3.
Register
is highlighted, press
OK
.
4.
Press
and
hold
Find
button
on
base
is displayed.
5. Press and hold
on the base until you hear a
beep and the In use light starts to flash.
6. Immediately, select
OK
on the handset. The handset
will display
Registering
handset
to indicate the
base is in registration mode. If the system PIN is not
0000 then you will be prompted to enter it, then
select
OK
.
7. Once registration is successful the handset will show
Handset
x
registered (with X being the assigned
handset number). The handset will then synchronise
data with any other registered handsets, e.g. contacts,
speed dials, handset names and text messages.
Summary of Contents for BT 7600
Page 90: ......