OPERATION:
Once you have paired the Energy Monitor and
Wifi-Link, after around 30 seconds the monitor will
start to send data to Wifi-Link which will be displayed
on the LCD screen.
The energy data can also be displayed on the
LightwaveRF app or PC web console. As long as your
device is registered with the Wifi-Link, you should
automatically be able to see the live data by
migrating to the ‘Ecometer’ tab (there may be a short
delay when you first view the page).
You can adjust the electricity tariff cost calculations
by choosing ‘Comm Settings’ and then ‘Eco Meter’ on
the settings tab of the app. For guidance on how to
do this using the web console please follow the
online instructions.
Battery Replacement
Requires 2 AA batteries (not included). When battery
voltage is low, the transmission range may
become poor and meter readings may be
unreliable. Slide down the battery cover and replace
with a fresh new battery.
