LightwaveRF Connect JSJS LW550, Operation Manual

Page: 3 / 7

NOTE:
Learning mode will only be initiated for 6
seconds, indicated by fl ashing LEDs; if no action or
signal is received during the 6 seconds then the
module will automatically exit learning mode.
The LED unit can be paired with up to six unique
transmitting devices at any one time.
Unpairing the device with the remote control
1. Enter
LEARNING MODE
by temporarily removing
one of the batteries and then replacing it; the LEDs
will fl ash to indicate that learning mode has been
activated.
2. On the remote handset press
‘OFF’
; the LEDs on
the receiving unit will fl ash rapidly to con fi rm that it
is now unpaired with the transmitting remote.
The LED unit can be paired with up to six
transmitting devices at any one time. Therefore, if
multiple devices are paired, it may be simpler to
completely clear the memory than to unpair
individual devices.
Complete Clear Memory:
1. Enter
LEARNING MODE
by temporarily removing
one of the batteries and then replacing it; the LEDs
will fl ash to indicate that learning mode has been
activated.
2. While the LEDs are fl ashing, hold down the manual
button; the LEDs will rapidly fl ash to con fi rm that the
memory has been cleared.