SF000 LiDAR Sensor
Product guide
Operating concepts
Distance measuring
The SF000/B is a single point distance measuring LiDAR. It uses time of flight technology to determine the distance
of a target at a configurable update rate of 48 Hz to 388 Hz.
The SF000/B can be connected to a host controller with the serial or I2C interface. The serial port (3.3 V logic level, 5
V tolerant) has a configurable baud rate. The I2C serial bus (3.3 V logic level and 3.3 k pull up resistors, 5 V tolerant)
has a configurable address and is an alternative to the serial port when multiple devices are connected on a
common bus.
LightWare Studio showing measurements from the SF000/B
17 of 47
SF000 microLiDAR™ sensor - Product guide(Rev 5) | © LightWare Optoelectronics (Pty) Ltd, 2021 |
