Lightware MMX8x4-HT Series, User Manual

Page: 68 / 163

5. Software Control – Lightware Device Controller MMX8x4-HT series – User's Manual 68
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
6.7.9. Advanced Analog Input Channel
This settings refers to the advanced analog audio signal.
1
3 t
e
q
7
5
8
w
r
4
9
6.7.10. Legend of Embedded or Advanced Input Channel
1
Channel name Displays the channel name. All the settings below belongs to the channel.
2
Digital audio
selector menu
Drop-down menu for selecting the digital audio channel. For more details see Digital
Audio Selector Menu section.
3
Phase invert button It inverts the phase of the input signal.
4
Preset button Clicking on this button opens a
Channel Preset
window where the channel presets can be
saved, loaded or deleted. For more details see Channel Presets section.
5
Gain section GAIN setting is for increase (or decrease) the input signal level, expressed in dB. For more
information see Gain Settings .
6
Sampling frequency
display
It shows the sampling frequency of digital audio.
7
HPF button/LPF
button
High-pass filter lets pass the audio signals above 100Hz frequency. Click on the button to
toggle turn it on and off.
Low-pass filter lets pass the audio signals under 15kHz frequency. Click on the button to
toggle turn it on and off.
8
EQ section:
HIGH, HMID, LMID,
LOW
The equalizer section is for set the proper rate of the different frequencies (high: 8kHz;
high-mid: 1.6 kHz, low-mid: 400 Hz, low: 100Hz). See more details in Equalization (EQ)
Settings section.
9
Factory defaults
restore button
Restore the factory default settings on the microphone channel. For more details see
Factory Default Settings.
q
Input volume fader Sets the volume of the input audio signal between -80dB and +10dB. It also can be
controlled by scrolling or writing the value in the text field.
w
Signal indicator
chart
See more details in Panorama or Balance Settings section.
e Mute/Unmute Mutes/unmutes the audio input.
r
Duck button This is a voice activation feature, allowing the volume of the voice of a person speaking
into the microphone to be automatically focused, and the volume of the rest of the
sounds to be lowered as soon as the presenter starts speaking.
t
Balance section Balance can be set in this section. For more details, see Panorama or Balance Settings .
#analogaudio #balance volume #advancedaudio
  
