Lightware HDMI-3D-OPT-RX150RA, User Manual

Page: 14 / 97

3. Product Overview HDMI-3D-OPT series – User's Manual 14
3.4.2. HDMI Connector
The extenders provide standard 19-pole HDMI connector
for input and output. Always use high-quality HDMI cable
for connecting sources and displays.
3.4.3. DVI-I Connector
SW4-OPT-TX240RAK transmitter provides 29-pole „digital only” DVI-I
Dual-Link connectors (only digital pins are internally connected) for
input and local output. This way, users can plug in any DVI connector,
but keep in mind that analog signals (such as VGA or RGBHV) are not
processed.
Always use high-quality DVI cable for connecting sources and displays.
Pin Signal Pin Signal
1 TMDS Data2- 16 Hot Plug Detect
2 TMDS Data2+ 17 TMDS Data0-
3 TMDS Data2 Shield 18 TMDS Data0+
4 Not connected 19 TMDS Data0 Shield
5 Not connected 20 Not connected
6 DDC Clock 21 Not connected
7 DDC Data 22 TMDS Clock Shield
8 Not connected 23 TMDS Clock+
9 TMDS Data1- 24 TMDS Clock-
10 TMDS Data1+ C1 Not connected
11 TMDS Data1 Shield C2 Not connected
12 Not connected C3 Not connected
13 Not connected C4 Not connected
14 +5V Power C5 GND
15 GND (for +5V)
3.4.4. DisplayPort Connector
SW4-OPT-TX240RAK transmitter provides standard 20-
pole DisplayPort connector for input. Always use high
quality DP cable for connecting DisplayPort devices.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
C1 C2
C4 C3
C5
17 18 19 20 21 22 23 24
3.4.5. SC Fiber Optical Connector
HDMI-3D-OPT series transmitters and receivers provide
multimode SC fiber optical input and output connectors.
Maximum fiber cable distances can be found in the
Maximum Fiber
Cable Extensions section.
WARNING! Please do not look directly into the SC fiber optical
connector if the cable is connected to the transmitter only and the
laser is active.
3.4.6. Analog Stereo Audio Connector (3.5 mm Jack)
The connector is used for receiving unbalanced analog audio
signal. It is also known as (3.5 mm or approx. 1/8”) audio jack,
phone jack, phone plug and mini-jack plug.
Pin nr. Signal
1 Left
2 Right
3 Ground
Jack audio plug pin assignments
You can find more information about audio functions in the Audio
Interface section.
3.4.7. Analog Stereo Audio Connector (5-pole Phoenix)
5-pole Phoenix connector is used for balanced analog
audio output. Unbalanced audio signals can be
connected as well. For unbalanced output c and ground to
the source and connect – to the ground.
Pin nr. Signal
1 Left+
2 Left-
3 Ground
4 Right-
5 Right+
Analog audio connector and plug pin assignments
Compatible Plug Type
Phoenix
®
Combicon series (3.5mm pitch, 5-pole), type: MC 1.5/5-ST-3.5.
You can find more information about analog audio function in the
Audio Interface section. Audio cable wiring guide is in the Audio Cable
Wiring Guide section.
1 2 3
1 2 3 4 5
3.4.8. S/PDIF Connector
HDMI-3D-OPT-RX150RA receiver provides standard RCA
receptacles for digital coaxial audio outputs.
You can find more information about audio functions in the Audio
Interface section.
3.4.9. RS-232 Connector (3-pole Phoenix)
The extender contains a 3-pole Phoenix connector which is
used for RS-232 serial connection.
Pin nr. Signal
1 Ground
2 TX data
3 RX data
RS-232 connector pin assignments
Compatible Plug Type
Phoenix
®
Combicon series (3.5mm pitch, 3-pole), type: MC 1.5/3-ST-3.5.
You can find more information about RS-232 interface in the Serial
Interface section.
3.4.10. RS-232 Connector (D-sub)
HDMI-3D-OPT-RX150RA receiver contains
RS-232 port which can be connected by
an industry standard 9-pole D-sub female
connector.
Pin nr. RS-232 pin-out
1 Not connected
2 TX data transmit (output)
3 RX data receive (input)
4 DTR (Internally connected to Pin 6)
5 GND signal ground (shield)
6 DSR (Internally connected to Pin 4)
7 RTS (Internally connected to Pin 8)
8 CTS (Internally connected to Pin 7)
9 Not connected
You can find more information about RS-232 interface in the Serial
Interface section.
1 2 3
1 5
9 6
  
