Non Lightstat Automatic Lighting Control Connections
Use #18 gauge 2-conductor twisted pair cable between the Lightstat
TME
and
the customer supplied switch or alternate closed contact.
C1- C2 cable
does not
have polarity, either wire may be connected to either
terminal. Cables
do not
have to be shielded.
At the Lightstat
TME
end connect the cable to the two terminals marked
C1
and
C2
. At the other end connect it to the customer supplied switch or alternate
closed contact.
The
C1
and
C2
terminals are contact closure terminals and should not be
connected to any power.
10