SR804N Cable Modem User Manual
47
Sets the RTS threshold. Packets exceeding this threshold will cause the AP to
perform an RTS/CTS exchange to reserve the wireless medium before packet
transmission.
5.7.5
Access Control
Choose
Wireless
>
Access Control
to display the following page.
Figure 44 Access Control setting
This page allows you to control which wireless clients can access your wireless
network. It also provides information about wireless clients connected to your access
point.
MAC Restrict Mode:
Selects whether wireless clients with the specified MAC address are allowed or
denied wireless access. To allow all clients, select Disabled.
MAC Addresses:
A list of wireless client MAC addresses to allow or deny based on the Restrict Mode
setting. Valid input MAC address formats are XX:XX:XX:XX:XX:XX and
XX-XX-XX-XX-XX-XX.
Connected Clients:
A list of connected wireless clients. When a client connects (associates) to the
network, it is added to the list; when a client leaves (disassociates) from the network,
it is removed from the list. For each client, the age (in seconds), estimated average
