Controls and Functions
LightSPEED
DOWN
UP
Set
LightSPEED
On/Off
Switch
Mute
Switch
Red LED
Door
Latch
LCD
Display
10
2
9
1
Battery
Charge
Jack
6
11
9
3
4
Mic
Jack
5
12
GT
MT
Gain
Adjust
8
Battery
Compartment
CH: 001
7
Belt
Clip
1.
1.
1.
1.
1. Power Button:
Power Button:
Power Button:
Power Button:
Power Button: Turns the transmitter ON. (Hold for two seconds.)
2.
2.
2.
2.
2. LCD Display:
LCD Display:
LCD Display:
LCD Display:
LCD Display: Information screen appears when the power is switched on.
3.
3.
3.
3.
3. Red LED:
Red LED:
Red LED:
Red LED:
Red LED: Lights up briefly when power is switched on, flashes
continuously when audio signal is muted.
4.
4.
4.
4.
4. Mute Switch:
Mute Switch:
Mute Switch:
Mute Switch:
Mute Switch:
Turns the audio signal on or off.
The red LED will flash when
MUTE is engaged.
5.
5.
5.
5.
5. Microphone Jack:
Microphone Jack:
Microphone Jack:
Microphone Jack:
Microphone Jack:
Microphone connects to transmitter here.
6.
6.
6.
6.
6. Battery Charge Jack:
Battery Charge Jack:
Battery Charge Jack:
Battery Charge Jack:
Battery Charge Jack: Optional battery charger plugs in here (for NiMH
batteries only).
7.
7.
7.
7.
7. Belt Clip
Belt Clip
Belt Clip
Belt Clip
Belt Clip
8.
8.
8.
8.
8. Gain:
Gain:
Gain:
Gain:
Gain: Provides adjustment for differing voice levels and microphone
sensitivities.
9.
9.
9.
9.
9. UP and Down Buttons:
UP and Down Buttons:
UP and Down Buttons:
UP and Down Buttons:
UP and Down Buttons: These buttons scroll up and down between setup
screens on the LCD display. They are also used to enter changes in each
setup screen.
10.
10.
10.
10.
10. Set Button:
Set Button:
Set Button:
Set Button:
Set Button: This button is used to enter and save changes to the
transmitter settings.
11.
11.
11.
11.
11. Door Latch:
Door Latch:
Door Latch:
Door Latch:
Door Latch: A door latch button is located on each side. Press both to
open the battery compartment door.
12.
12.
12.
12.
12. Battery Compartment
Battery Compartment
Battery Compartment
Battery Compartment
Battery Compartment
Wireless Transmitter
Belt-pack
Warranty
LightSPEED WARRANTY
The 7100DX Quad-RAK Dual Diversity UHF Wireless Microphone Sys-
tem is guaranteed against malfunction due to defects in materials and
workmanship for a period of three years, beginning at the date of origi-
nal purchase. If such a malfunction occurs, the product will be repaired
or replaced (at LightSPEED's option) without charge during the period
and under the limitations stipulated in the data sheet or owner's manual
(if any) for this individual product. Limited exclusions specifically apply to
microphone elements and their assemblies, also external cables and
wires. Warranty on microphones/microphone elements is limited the
original manufacturer's warranty. If delivered prepaid to the LightSPEED
factory or an authorized warranty service center, the unit will be re-
turned prepaid. Warranty does not extend to finish, appearance items,
or malfunctions due to abuse or operation other than specified condi-
tions, nor does it extend to incidental or consequential damages, so the
above exclusion may not apply to you. Repair by other than LightSPEED
or its authorized service agencies will void this guarantee. Information
on authorized service agencies is available from LightSPEED.
5
22