background image

12

L E S   6 0 0   O P E R A T I N G   I N S T R U C T I O N S  

These helpful suggestions are provided to maximize the 

successful use of your new Classroom Amplification system:

Involve your students in this new process right from the

beginning. When setting the volume, ask the students,

“What is the correct volume?” (Each level will seem 

“louder” for them than you.)  Ask, “When should we use

the hand-held microphone?”  Some teachers introduce the

system by passing the hand-held microphone around the

room for each student to say hello.

With the Lavaliere and Flexible Collar Microphone, 

position the microphone so that it is 4-5 inches from your

mouth.  This allows a good signal to be picked up yet is 

far enough from the mouth to minimize extraneous noises

generated during speech.  Keep the foam cover on the

microphone to help reduce additional noise. 

Speak in a natural voice. A normal conversational speech

level should provide an adequate speech signal. It is not

necessary to increase the intensity of your voice because 

the FM system is providing adequate amplification 

(approximately 5-10 dB) above your normal voice level.

Avoid wearing jewelry that may rub or knock against the

microphone or mic cord and produce unwanted noise.

Find a safe, secure place away from excessive heat, cold 

or dampness for overnight storage of the Transmitter and

Hand-held Microphone. Do not wrap the cord around the

Transmitter.

Use the on/off control on the Transmitter to mute the 

system when needed (such as during private conversations

with a student, parent, or other classroom visitor).  Since

this equipment is sometimes capable of transmitting more

than 100 feet, private conversations in the hallway, in the

staff room or on the playground may also be broadcast to

the class if the Transmitter is not turned off!

Tips on Using Classroom
Amplification

Summary of Contents for Listening Enhancement System LES 600 Series






















Reviews: