1.
Specifications
Power Supply:
AC100-240V,50-60Hz
Power Consumption:
60W
LED Source:
2*10W 4IN1 (RGBW) CREE LEDs
Beam Angle:
25°
Dimmer:
0~100% Linear Dimming
Control mode:
DMX 512,Master-slave,Auto run,Sound-activated
DMX Channel:
9/17CH
Rotation Angle:
X 540 degree / Y unlimited rotation
Dimming:
0%-100% linear dimming
Connector:
DMX via 3-pin XLR cable
Date In and out:
3-pin XLR cathode and anode plug
Advantages:
1.Infinite rotation
2.Novelty double sided beam effect
3.Control each side individually
4.LCD display,small size,compact design
Cooling System:
Low noise and efficient fan cooling system
N.W/G.W:
2.5kg/3kg
Dimension:
155*140*230 mm
Outer Packing size:
380*350*300mm(4pcs/CNS)
2. SAFETY INTRODUCTION
• If the device has been exposed to temperature changes due to environmental changes,
do not switch it on immediately. The arising condensation could damage the device.
Leave the device switched off until it has reached room temperature.
• It is essential that the device is earthed. A qualified person must carry out the electric
connection.
• Make sure that the available voltage is not higher than stated at the end of this manual.
• Make sure the power cord is never crimped or damaged. If it is damaged, ask your
dealer or authorized agent to replace the power cord.
• Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power cord by plug. Never pull out the plug by tugging the power cord.
• DISCONNECT DEVICE:
Where the MAINS plug or an appliance coupler is used
as the
disconnect device, the disconnect device shall remain readily operable.
• Due to the magnifying type lens, please keep the lens out of contact with direct us.
Direct we can cause heat to build up inside of the unit, which will seriously damage
unit.
CAUTION:
Summary of Contents for DOUBLE BEAM
Page 1: ......
