8
www.lights.de
LIGHTS 4 Europe GmbH & Co. KG ∙ Gaildorfer Str. 6 ∙ D-71522 Backnang
Tel. +49 7191 323020 ∙ Fax +49 7191 323029 ∙ [email protected]
IG_
L
u
c
id_
s
iriu
s
_
D
E
_
2
3
.0
6
.2
0
1
7
_V
3
.0
-
S
imi
lar
to
ill
u
s
tr
a
tion
s
, t
e
c
h
n
ic
a
l
d
a
ta
a
re
s
u
b
jec
t t
o
c
h
a
n
g
e
DALI connector
The Lucid sirius DALI 190 has a DALI connection. This variant is fitted with an Inventronics power supply
Wiring diagram
The luminaire’s second cable is used for the DALI
connection. This should be connected as recom-
mended in the next step. You do not have to con-
sider the polarity (+/-) of the DALI control cable.
For the connection terminal, we recommend using a
2 pole, insulated WAGO 294 connector for a nomi-
nal cross section of 2.5 mm² and a nominal voltage
of at least 500 V, meeting the VDE directives 0700
(EN 60 335-1), VDE 0613 (EN 60 998) and VDE
0711 (EN 60 598-1 and VDE 24 (EN 2 598-1) for
use in devices and lights up to 24 A nominal cur-
rent.
1-10 V connector
*
1
Wiring diagram
The luminaire’s second cable is used for the 1-10 V
connection. This should be connected as recom-
mended in the next step.
Blue +
White
–
For the connection terminal, we recommend using a
2 pole, insulated WAGO 294 connector for a nomi-
nal cross section of 2.5 mm² and a nominal voltage
of at least 500 V, meeting the VDE directives 0700
(EN 60 335-1), VDE 0613 (EN 60 998) and VDE
0711 (EN 60 598-1 for use in devices and lights up
to 24 A nominal current.
*
1
When using the Meanwell power supply HLG-240H-36B the power of the power supply must be limited to 80 %
using the dim input (e.g. maximum 8 V or max. 80 kΩ). The maximum power consumption of 190 W may not be
exceeded.
-
+
