MonsterEyes II
TM
Quick Start
Although it has many advanced features, MonsterEyes II is quite easy to set up
and it is fully operational right out of the box. You will need to connect a 12
volt DC source to the power jack on the right rear side. Next, you must decide
if you will be connecting passive speakers to the speaker terminals or an audio
system to the RCA connectors. Eyeballs need connected to the eyeball output
connectors. Details about connecting eyeballs may be found on pages 6-8 of this
manual. You may connect a sensor or trigger to the terminals on the back left
side, if desired. Otherwise, just use the internal timer. Once power is applied, the
unit will immediately start working.
Now choose your ambient and scare sounds or choose RANDOM for one
or both audio selections. Out of the box, you will find the timer control fully
counterclockwise which is the off position. If you’re not using a sensor or other
type trigger, rotate this control to the desired position for it to trigger itself. You
can tweak the speed and brightness as per your own taste. The speaker knob
will need to be rotated clockwise for the desired volume if you have connected
passive speakers to the speaker terminals. If using line level audio from the RCA
connectors, adjust the volume from your audio system to the desired level.
MonsterEyes II
TM
Controls
AUDIO SELECTION (AMBIENT)
This six-position rotary switch allows you to select one (1) of four (4) available
ambient sound tracks. You may also choose no ambient sound by selecting OFF
or you can have the four tracks play at Random by choosing “R”.
2
