THRESHOLD-LEFT
Adjusts the minimum amount of voltage applied to connected lights to increase sensitivity
and reaction time.
THRESHOLD-RIGHT
Same as left threshold, except affects right channel only
DIMMER MAX
Sets the maximum brightness of lights connected to the dimmer channel.
AUDIO MODE
Choose between continuous loop, triggered tracks or external audio.
AUDIO TRACK
Choose the specific audio track to use. In the LOOP mode, you can choose between
pure thunder or thunder plus rain and occasionally wind. In the TRIGGERED mode, the
options are 5-second, 15-second or 30-second.
LIGHTNING AUDIO
Determines the routing of the audio for the lightning channels. A drawing showing details
on audio routing may be found here:
http://www.lightsalive.com/skin/frontend/lightsalive/default/pdf/ff351_audio_routing.pdf
DIMMER SOURCE
Determines audio routing for the dimmer channel. The dimmer can react to left channel
audio, right channel audio or a combination of both.
TEST MODE
Tests each channel of the FF-351, as well as confirming the compatibility of any LED
fixtures in use. Lights will ramp up, fade down, then flash rapidly.
MENU BACKLIGHT
Sets the intensity of the LCD display while in any of the setup up menu windows. Range
is 0-10. The default is 9 (bright).
MAIN BACKLIGHT
Sets the intensity of the LCD display in the “run” mode. Range is 0-10. Default is 1.
FACTORY RESET
Restores all the factory default settings within seconds.
BACK TO TOP
Returns you to the to the top of the menu.
ADVANCED OPERATION
The FF-351 will work right out of the box with no adjustments as mentioned in the QUICK START
section. However, you can customize some of the settings to optimize the system to better fit your
needs.
LEVEL
adjustments should be set so that lights react to subtle sounds, yet lights aren’t on solid
during a lightning strike. For the dimmer channel, the
LEVEL
will determine the depth of dimming
or how dim the light will become during a strike.
