Page 2 of 4
FXLD127FR5I LED FIXTURE
Version 1.1
OWNER’S MANUAL
05/11/2022
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
757 486 3588
the DATA - and DATA + wires at the last device. If you
have only a few fixtures very close together and a very
short run to the controller, then you may be able to
operate without the terminator.
OPERATION
A control panel on the back of the unit is used to set
the operating options. It consists of an LED display
and four buttons (MENU, UP, DOWN, and ENTER).
Push MENU to access the operating options. When
you reach the option you want to set or change, press
ENTER and use UP or DOWN to set a value. Push
ENTER to save your changes and activate the option.
See the "MENU NAVIGATION" diagram for additional
details.
The fan on the unit will turn on when temperature is at
or above 45° C and will turn back off at or below 34° C.
There are 7 operation modes: DMX 5 channel, DMX 9
channel, Color Fade, Color Change, Color Select,
Manual Level (6 selections), and Demo.
DMX OPERATION
For DMX operation, the FXLD127FR5I fixture can be
configured as a 5 channel or 9 channel unit. Use the
dXXX
(5 ch) or
AXXX
(9 ch) menu to set the starting
address of the unit. You can select the starting
address of the unit with the UP and DOWN buttons.
Detailed information on DMX channel operation is
given in the tables DMX VALUES AND FUNCTIONS.
The unit has an LED on the menu display (decimal
point). If the LED is flashing, the unit is NOT receiving
signal either from a DMX controller or from a master
fixture. The LED will disappear once a valid signal is
present.
MANUAL OPERATION
Color Fade (CFXX)
The Color Fade mode cycles smoothly through a
sequence of colors. Use the
CFXX
menu to set the
speed and activate the option. The range is from 00 to
99 with 99 as the fastest.
Color Change (CCXX)
The Color Change mode switches continuously
through a sequence of colors. Use the
CCXX
menu to
set the sequence speed. The range is from 00 to 99
with 99 as the fastest.
Color Select (CSXX)
The Color Select mode provides a multiple of colors at
various intensities. Use the
CSXX
menu to set the
desired color. Select color options from 00-99.
R, G, B, W, A Manual Level Control
You can operate individual color levels manually using
the
r000, G000, b000, E000,
and
Y000
menus. Use
the UP and DOWN buttons to change the level, then
push ENTER when done. The range is 000 - 255, with
255 as the maximum.
Demo Mode (dENo)
The unit cycles through a fixed series of color and
fades. There are no other adjustments or settings in
this mode.
Sound Mode (SOUN)
The unit reacts to sounds by changing colors
randomly. There are no other settings within this mode.
Sound mode can be activated in 9 channel mode with
DMX channel 9 set to 240-255. Intensity is controlled
with DMX channel 1 (0-255).
Dimmer Delay (dEL0)
This operation of this function has been discontinued.
MAINTENANCE AND REPAIR
TROUBLESHOOTING
Check that you have power applied to the unit.
Check the DMX control cable.
Check the address settings of the unit and the
controller.
CAUTION DO NOT OPEN UNIT
RISK OF ELECTRIC SHOCK
RISK OF FIRE
