LightPointe AireLink 60, Installation And User Manual

Page: 85 / 133

AireLink

60 Installation and User Manual Rev. D LinkManager™– Network Management
Platform
Page 85
6.3 RF LINK VIEW
Figure 6-5: RF Link View Screen
RF LINK
Link Status Displays Link Status

UP/DOWN
Mode Operational Mode

Alignment Mode / Data Transmission Mode
RSSI Displays System RSSI Reading
RSSI Alarm Threshold RSSI Alarm Threshold Value
RSSI Alarm Clear RSSI Alarm Clear Value
RF Band
Shows and allows changing radio TX transmission and RX receive frequencies
Options: 59.0, 59.5 and 60 GHz (low band) ; 62.0, 62.5 and 63 GHz (high band)
TX Power Shows System Transmit Power Level
Distance TX power reduction when systems are deployed over shorter distances
ACM Automatic Coding and Modulation Setting

ENABLED/DISABLED
Modulation Status Displays System Modulation Level
Set Modulation System Modulation (Only when ACM is DISABLED)
TX Lock Displays Transmitter Lock Status
RX Lock Displays Receiver Lock Status
Modem Lock Displays Modem Lock Status