LightPointe AireLink 60, Installation And User Manual

Page: 74 / 133

AireLink

60 Installation and User Manual Rev. D System Installation
Page 74
4. In case the antenna elevation needs to be adjusted downwards, take sure that the two Elevation
Locking Bolts are both in position II. If not, perform steps as described under 3.
Note
When re-arranging the antenna bracket for upwards/downwards
elevation adjustment, it is helpful to have a second person assisting the
process.
5. To adjust the antenna elevation use a 13 mm combination or racket wrench and turn the
Elevation Adjustment Screw either clock- or counter clock wise.
Azimuth Adjustment
1. To adjust the azimuth settings of the antenna see Fig. 5-15 and perform the following steps:
2. Slightly loosen the 4 Azimuth Adjustment Locking Bolts.
3. To adjust the antenna azimuth direction use a 13 mm combination or racket wrench and turn
the Azimuth Adjustment Screw either clock- or counter clock wise.
Figure 5-15: Azimuth Adjustment