User Manual
Insert the one end of the USB cable from the USB port
on the right side of the Control Unit.
Insert the other end of the USB cable into the USB port
on the Base Unit.
Insert the power supply terminal into the power connector
port on the controller unit. Insert the power supply plug
into a standard mains AC outlet.
Warning:
Risk of electrical shock
Before plugging into mains power visually inspect the power
supply plug and cable to ensure there is no damage.
If there are signs of damage
do NOT use.
Note: There are two USB ports on the control unit.
The right hand port
should
be used to connect the USB cable on the control unit to the USB port on the
base unit. If the USB cable is incorrectly connected to the data port on the
back side of the control unit, the instrument will not function.
4.3. Connecting the Power Cord
and USB cable
9