Specular anodized aluminum mirror,
adjusts to left or right side of bed
120V medium base narrow spot,
50W reflector lamp
MD*4 2' x 2' Recessed or Surface
MD2G2SB
Page 3 of 4
Multi-Function Patient Lighting
Nurses Night Light
(Optional)
Lights night stand between beds.
Field adjustable for either right or left side of patient's bed.
No glare to any patient.
Wired for independent switching.
Options
Sequential Switch.
Suffix:
SW
MD*4’s optional low voltage (1-3 volts) sequential switch mounted in the fixture is listed in com-
pliance with UL 544 for medical and dental equipment. Two red wires coming from the fixture can
be wired to a wall receptacle (by others) for use with that manufacturers pillow speaker. The pil-
low speaker is used to control the television, call the nurse and control the lighting. To control
the lighting it should be specified to have a normally open contact switch.
Pressing this switch on the pillow speaker the first time, turns the ambient light on; pressed a
second time, turns the reading light on and the ambient light off; pressed a third time, turns both
the ambient and reading lights on; pressed a fourth time turns both lights off. Pressing the button
again repeats the cycle.
Should the patient's bed be rolled away from the wall, the pillow speaker will simply pull free
from the wall receptacle avoiding any damage.
Nurse's night light.
Suffix:
NL
CAN BE SET TO
LEFT OR RIGHT
SIDE OF BED
Pillow speaker (by others)
Night Light
: 12V, 3 watt, cool white LED (50,000
hours life) (supplied with fixture). Suffix:
LD
