DMR01
Decorative, Round Marker LED
Page 2 of 2
Philips Lightolier
t: (508) 679-8131
w: www.lightolier.com
DMR01 February 27, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012. All rights reserved.
Job Information
Type:
4 ⅛"
(105 mm)
¾"
(19 mm)
1 ¾"
(45 mm)
4 ⅛"
(105 mm)
1 ¾"
(45 mm)
1
11
16
"
(43 mm)
4
15
16
"
(126 mm)
3 ¼"
(83 mm)
¾" (19 mm)
3 ¼"
(83 mm)
Features
1. Heat Sink/Driver Housing:
Die cast aluminum.
2. Lens:
Injection molded acrylic sandblasted with clear
polished edges, developed for optimum optical output.
Decorative aluminum shield.
3. Acrylic Mounting Ring:
Die cast aluminum.
4. Decorative Light Diffuser:
Die cast aluminum.
5. Re-modeler Junction Box:
Die cut and formed 16ga.
Galvanized steel. Can be used in new or existing construction.
Electrical
LED:
(1) 1W 3000K white LED. Average expected life, under
normal operating conditions is 50,000 hours with lumen
maintenance of 70% of original light output.
Driver:
Integral Class 2 power supply.
Electrical (continued)
Voltage:
120V
Output Wattage:
1 W
Input Current (max.):
65 mA
Frequency:
50/60 Hz
Output Voltage (VDC):
4 V
Constant Current:
350 mA
Finish
Satin aluminum with protective clearcoat.
Labels
cULus Listed. Suitable for Wet Locations. Type IC.
Wall mount only.
