DMP01
Decorative, Pattern Maker LED
Page 2 of 2
Philips Lightolier
t: (508) 679-8131
w: www.lightolier.com
DMP01 May 31, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.
Job Information
Type:
Features
1. Heat Sink/Driver Housing: Die-cast aluminum.
2. Lens: Injection molded acrylic sandblasted with clear
polished edges, developed for optimum optical output.
3. Face Plate: Die-cast aluminum.
4. Light Shield: Die-cut .020” thick aluminum (not shown).
5. Decorative Light Diffuser: Die-cast aluminum.
6. Switch Box Mounting Plate: 18ga. C.R.S. zinc plated,
for mounting to a 3 1/2” deep switch box.
Electrical
LED: (1) 1W 3000K white LED. Average expected life, under
normal operating conditions is 50,000 hours with lumen
maintenance of 70% of original light output.
Driver:
Class 2 power supply.
Electrical (continued)
Voltage:
120V
Output Wattage:
1 W
Input Current (max.): 65 mA
Frequency:
50/60 Hz
Output Voltage (VDC): 4 V
Constant Current:
350 mA
Finish
Satin aluminum with protective clearcoat.
Matte white powder coat.
Labels
cULus Listed. Suitable for wet locations.
Wall mount only.
4 ½"
(114 mm)
2 ¼"
(58 mm)
2 ¾"
(70 mm)
2 ⅛"
(54 mm)
2 ¾"
(70 mm)
2 ¼"
(58 mm)
13
16
" (20 mm)
2"
(51 mm)
13
16
"
(20 mm)
2"
(51 mm)
