background image

2

If, after reading your manual, you still have questions regarding this 

product, we recommend that you see your Lightning Audio dealer. If you 

need further assistance, you can call us direct at 1-800-669-9899. Be sure 

to have your serial number, model number and date of purchase available 

when you call.

Safety

This symbol with “WARNING” is intended 

to alert the user to the presence of important 

instructions. Failure to heed the instructions will 

result in severe injury or death.

This symbol with “CAUTION” is intended to 

alert the user to the presence of important 

instructions. Failure to heed the instructions can 

result in injury or unit damage.

• To prevent injury and damage to the unit, please read and follow the 

instructions in this manual. We want you to enjoy this system, not get 

a headache.

• If you feel unsure about installing this system yourself, have it installed 

by a qualified Lightning Audio technician.

• Before installation, disconnect the battery negative (-) terminal to 

prevent damage to the unit, fire and/or possible injury.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide more reasonable protection against harmful interference 

in a residential installation.
Operation is subjected to the following two conditions: (1) This device 

may not cause harmful interference, and (2) the device must accept any 

interference received, including interference that may cause undesired 

operation.
This equipment generates, uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications.  However, there is 

no guarantee that interference will not occur in a particular installation.  

If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, 

you are encouraged to try to correct the interference by one of the following 

measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected. 

•  Consult the dealer or an experience radio/TV technician for help.

Introduction

PRACTICE SAFE SOUND

Continuous exposure to sound pressure levels over 100dB 

may cause permanent hearing loss. High powered auto 

sound systems may produce sound pressure levels well over 

130dB. Use common sense and practice safe sound.

2 Introduction
3 Specifications

4-5 Design Features
6-7 Installation

Contents
Installation Considerations
Mounting Locations
Wiring

8-11 Operation

Basic
Radio
USB/SD Card/CD
Remote Control

11 Troubleshooting
12 Limited Warranty Information

Dear Customer,

Congratulations on your purchase. At Lightning Audio we are 

pleased that you chose our product. 

For maximum performance we recommend you have your new 

Lightning Audio product installed by an Authorized Lightning 

Audio Dealer. Please read your warranty and retain your receipt 

and original carton for possible future use.

Visit our web site for the latest information on all Lightning Audio 

products; www.lightningaudio.com  

or, in the U.S. call 1-888-881-8186 or FAX 1-800-398-3985

Table of Contents

.

Summary of Contents for LA-1000













Reviews: