36
to the new location. If the new location is at a different facility then the User
should consider repackaging the LightLink CXL system in its original packing prior to
moving to the new site. This will help to prevent any damage occurring to the
System. When the relocation is completed then the correct operation and
functioning of the UV light system should be performed according to the following
steps in section 5.4 of this Operator Manual.
5.2
Unpacking and Receiving Inspection
When receiving the UV light system, usually there is only one cardboard box. Inside the
box, you will receive the wheel base & control box, LCD touch screen, UV light head and
UV light arm ass’y.
Figure 5.1
Whole System Packaging Carton
XL0000
LightLink-CXL
Serial Number :
Manufactured By :
LightMed Corporation, No.1-1, Lane 1,
Pao-An St. Sec. 3, Shulin City,
TEL : 886-2-2688-1726
E-mail : [email protected]
FAX : 886-2-2688-5875
Taipei, TAIWAN, R.O.C. 238
Manufactured :
Model :
This device complies to the requirements of
21CFR . Chapter 1 . Sub-chapter J .
Ophthalmic Corneal Cross-Linking
Fragile Medical Device
LightLink-CXL
Figure 5.2
Packaging Label
Summary of Contents for LightLink CXL
Page 1: ...Operator s Manual LightLink CXL Corneal Cross Linking System ...
Page 2: ...1 ...
Page 4: ...3 ...
Page 56: ...55 ...
