18
DEUTSCH
ENGLISH
Connections and Control Elements:
Control Elements:
Start:
Connect the device to the power supply and wait a few seconds until it is ready
for operation.
Menu:
Navigation in the menu is performed using the four menu buttons below the display. Use the
„
Menu
“ key to activate the menu, navigation is done using the „
Up
“ and „
Down
“ keys.
A corresponding selection is confirmed with the „
Enter
“ key.
Static, Auto or Sound mode:
The device contains static programs (St) as well as automatic programs that run according to
fixed schemes (Au). In addition, effect sequences can be controlled via the built-in micro-
phone to match the music (Sn). The selection of the respective mode is made via the menu
directly on the device.
Operating mode master/slave:
If you connect several devices of the same type via DMX, they can be controlled simulta-
neously via the master device. To do this, set the desired function on the first device in the
chain; the other devices in the series must now be set as „slaves“. Now the first device in the
chain gives the function to all other devices and all devices run simultaneously.
1
2
3
4
5
6
7
8
9
1
Locking Screw
2
Mounting Bracket
3
LED-Lens
4
Fan outlet
5
DMX Input (3-pole)
6
DMX Output (3-pole)
7
Display
8
Menu buttons
9
Power Cable
