Lightmaxx LIG0009576-000 User Manual Download Page 11

 Important safety instructions! Please read before connection!

 

 
 

DANGER! (For babies and children) 

Dispose of or store any packaging material properly! Packaging material must be kept out 
of the reach of babies and children due to the 

risk of suffocation

 

Ensure that children never use the appliance unattended! In addition, make sure that 
children do not remove (small) parts from the device, as they could suffocate by swallowing 

parts! 
 

 

Hint! (Operating conditions) 

Due to its structural characteristics, the device is designed for indoor operation (IP20). 
Never expose the device to rain, moisture or liquids as this may cause damage.  

 
Vibrations, dust or sunlight can also cause damage, avoid them! 

 
If the load is too high, the stand can tip over and cause injury and cause damage to 

property. Never use the stand in the manner prescribed for the the maximum load 
capacity is exceeded. If the stand is placed on a soft or non-horizontal surface, it may tip 

over and cause injury and damage to property. Only place the stand on a level and solid 

surface . Pay attention to your fingers when mounting the stand, to avoid the risk of 
bruising. 

 
 

 
 

Symbols on device and packaging: 

 

The lightning flash symbol warns the user of uninsulated voltages and the risk 
of electric shock. 

 

The exclamation mark symbol draws the user’s attention to important maintains 
and operating instructions in the manual. 

 
 

Only suitable for indoor use. 
 
This symbol defines the minimum distance of the object to be illuminated. 

 
 

Read the manual 

 

 

Please read and follow the warnings and recommendations carefully to ensure safe 

and trouble-free use. 

 
 

 
 

Summary of Contents for LIG0009576-000






















Reviews: