22
DEUTSCH
ENGLISH
Static, Auto or Sound mode:
The device contains automatic programs that run according to fi xed patterns. In addition, effect
sequences matching the music can be called up via the built-in microphone. The selection of the
respective mode is made via the menu directly on the device.
Operating mode master/slave:
If you connect several devices of the same type via DMX, they can be controlled simultaneously via
the master device. To do this, set the desired function on the fi rst device in the chain; the other de-
vices in the series must now be set as „slaves“. Now the fi rst device in the chain gives the function
to all other devices and all devices run simultaneously.
Operating Remote control:
1.
Turns the device on and off.
2.
Sets the device to DMX – use ,+’ and ,-‘ buttons to change the
DMX Channels (001-512).
3.
Sets the device to static colour mode – use ,+’ and ,-’ buttons to
select desired color.
4.
Sets the device to colour selection mode – use ,+’ and ,-’ speed
buttons to select desired speed.
5.
Sets the device to gradient mode - use ,+’ and ,-’ colour buttons
to select desired programme, and use use ,+’ and ,-’ speed
buttons select programme speed.
6.
Sets the device to active sound mode use ,+’ and ,-’ colour
buttons to select desired programme and use ,-’ and ,+’ sen
buttons to select desired sensitivity level(1-4).
7.
Sets the device to strobe mode – use ,+’ and ,-’ colour buttons
to select desired programme and use ,+’ and ,-‘ speed buttons
to select desired fl ash speed.
8.
Sets the device to Auto mode – use ,+’ and ,-‘ speed buttons to
select desired speed.
9.
Sets the device in gradient mode – use ,+’ and ,-‘ buttons to
select desired speed.
10.
Activates the DMX settings – use ,+’ and ,-‘ DMX buttons to
change the DMX channels (001-512).
11.
Sets the static colours / programmes – use ,+’ and ,-‘ speed
buttons to change desired colours / programme (Note: only avai-
lable in static colours, gradient, tone active and Strobe-modes).
12.
Sets the programme speed level – use ,+’ and ,-‘ buttons to
change the desired programme speed level(Note: only in change
colours, colours, fade-, strobe-, auto – and colour – chase -
modes).
13.
Sets the tone sensitivity level – use ,+’ and ,-‘ buttons change
desired sound sensitivity level (Note: only in Tone available active
mode).
