2. Switch mains power off, strip mains cable (max 2,5 мм2). Unpack the luminaire.
3. Smoothly press the cover against the lock, turn the lock counter clockwise, open the cover,
engage cover catch.
4. Place M10 square nuts (pos. 1) into slots inside the luminaire. The nut should rest on
luminaire's housing with its entire surface.
5. For CR QR6 luminaries power cable is put out of body through cable gland and fixed in it. Put
cable through bracket. Position luminaire's mounting bracket at the desired place. Lock the
bracket with M10 screw through simple washer and lock washer to M10 nut inside the luminaire.
Put luminaire's mounting bracket at the installation place. Lock the bracket with M10 screw
through simple washer and lock washer to M10 nut inside the luminaire.
6
